Kenneth J Anusavice,
DIST PROF EMERITUS
Teaching Profile
Courses Taught
2008
DEN8290 Special Topics
2007
IDH4905 Individual Work
2006-2007
DEN8717C Cl Use of Dent Biomat
2007
DEN8719C Cl Select of Dent Mat
Publications
Academic Articles
2022
Cyclic contact fatigue behavior of baria-silicate glass-ceramics as a function of crystal aspect ratio.
Journal of the European Ceramic Society.
42(5):2441-2448
[DOI] 10.1016/j.jeurceramsoc.2022.01.012.
[PMID] 36090520.
2015
Peri-implant complications for posterior endosteal implants.
Clinical oral implants research.
26(12):1390-6
[DOI] 10.1111/clr.12484.
[PMID] 25263400.
2014
Cytotoxicity of alloying elements and experimental titanium alloys by WST-1 and agar overlay tests.
Dental materials : official publication of the Academy of Dental Materials.
30(9):977-83
[DOI] 10.1016/j.dental.2014.05.012.
[PMID] 24946979.
2014
Fracture analysis of randomized implant-supported fixed dental prostheses.
Journal of dentistry.
42(10):1335-42
[DOI] 10.1016/j.jdent.2014.07.001.
[PMID] 25016139.
2014
Influence of Roughness On the Efficacy of Grazing Incidence X-Ray Diffraction To Characterize Grinding-Induced Phase Changes in Yttria-Tetragonal Zirconia Polycrystals (Y-Tzp)
Journal of Materials Science.
49(4):1630-1638
[DOI] 10.1007/s10853-013-7846-z.
2014
Influence of substructure design and occlusal reduction on the stress distribution in metal ceramic complete crowns: 3D finite element analysis.
Journal of prosthodontics : official journal of the American College of Prosthodontists.
23(5):381-9
[DOI] 10.1111/jopr.12119.
[PMID] 24417730.
2014
Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results.
Journal of prosthodontics : official journal of the American College of Prosthodontists.
23(2):73-82
[DOI] 10.1111/jopr.12066.
[PMID] 23758092.
2013
Cytocompatibility of pure metals and experimental binary titanium alloys for implant materials.
Journal of dentistry.
41(12):1251-8
[DOI] 10.1016/j.jdent.2013.09.003.
[PMID] 24060476.
2013
Management of brain abscesses. II: Antibiotics and computed tomography.
Journal of clinical neuroscience : official journal of the Neurosurgical Society of Australasia.
20(12):1675-81
[PMID] 24358478.
2013
Randomized, controlled clinical trial of bilayer ceramic and metal-ceramic crown performance.
Journal of prosthodontics : official journal of the American College of Prosthodontists.
22(3):166-73
[DOI] 10.1111/j.1532-849X.2012.00913.x.
[PMID] 22978697.
2013
Surface degradation of dental ceramics as a function of environmental pH.
Journal of dental research.
92(5):467-71
[DOI] 10.1177/0022034513484332.
[PMID] 23569159.
2013
Time-Dependent Fracture Probability of Bilayer, Lithium-Disilicate-Based, Glass-Ceramic, Molar Crowns as a Function of Core/Veneer Thickness Ratio and Load Orientation
Dental Materials.
29:1132-1138
[DOI] 10.1016/j.dental.7013.08.206.
2013
Time-dependent fracture probability of bilayer, lithium-disilicate-based, glass-ceramic, molar crowns as a function of core/veneer thickness ratio and load orientation.
Dental materials : official publication of the Academy of Dental Materials.
29(11):1132-8
[DOI] 10.1016/j.dental.2013.08.206.
[PMID] 24060349.
2013
Use of intravenous recombinant tissue plasminogen activator in patients with borderline elevation of international normalized ratio.
Journal of vascular and interventional neurology.
6(2):1-8
[PMID] 24358409.
2012
Analysis of the molecular structure of human enamel with fluorosis using micro-Raman spectroscopy.
Journal of oral science.
54(1):93-8
[PMID] 22466892.
2012
Effectiveness of bonding resin-based composite to healthy and fluorotic enamel using total-etch and two self-etch adhesive systems.
Dental materials journal.
31(6):1021-7
[PMID] 23207210.
2012
Enamel roughness and depth profile after phosphoric acid etching of healthy and fluorotic enamel.
Australian dental journal.
57(2):151-6
[DOI] 10.1111/j.1834-7819.2012.01677.x.
[PMID] 22624754.
2012
Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental prostheses.
Dental materials : official publication of the Academy of Dental Materials.
28(1):102-11
[DOI] 10.1016/j.dental.2011.09.012.
[PMID] 22192254.
2012
Three years in vivo wear: core-ceramic, veneers, and enamel antagonists.
Dental materials : official publication of the Academy of Dental Materials.
28(6):615-21
[DOI] 10.1016/j.dental.2012.02.001.
[PMID] 22410113.
2011
A quantitative and qualitative analysis of ultrasonic versus sonic endodontic systems on canal cleanliness and obturation.
Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.
112(6):809-13
[DOI] 10.1016/j.tripleo.2011.06.002.
[PMID] 21906970.
2011
Nanostructure evaluation of healthy and fluorotic dentin by atomic force microscopy before and after phosphoric acid etching.
Dental materials journal.
30(4):546-53
[PMID] 21778600.
2010
Atomic force microscopy observation of the enamel roughness and depth profile after phosphoric acid etching.
Journal of electron microscopy.
59(2):119-25
[DOI] 10.1093/jmicro/dfp042.
[PMID] 19692346.
2010
Characterization of healthy and fluorotic enamel by atomic force microscopy.
Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada.
16(5):531-6
[DOI] 10.1017/S1431927610093748.
[PMID] 20813079.
2010
Fluoride and chlorhexidine release from filled resins.
Journal of dental research.
89(9):1002-6
[DOI] 10.1177/0022034510374055.
[PMID] 20581354.
2010
Interfacial toughness of bilayer dental ceramics based on a short-bar, chevron-notch test.
Dental materials : official publication of the Academy of Dental Materials.
26(2):111-7
[DOI] 10.1016/j.dental.2009.09.003.
[PMID] 19818486.
2010
Surface Roughness Resulting From Wear of Lithia-Disilicate-Based Posterior Crowns
Wear.
269(3-4):317-322
[DOI] 10.1016/j.wear.2010.04.015.
2009
Residual stress in glass: indentation crack and fractography approaches.
Dental materials : official publication of the Academy of Dental Materials.
25(11):1453-8
[DOI] 10.1016/j.dental.2009.07.001.
[PMID] 19671475.
2009
Viscoelastic finite element stress analysis of the thermal compatibility of dental bilayer ceramic systems.
The International journal of prosthodontics.
22(1):56-61
[PMID] 19260429.
2008
Clinical performance and wear characteristics of veneered lithia-disilicate-based ceramic crowns.
Dental materials : official publication of the Academy of Dental Materials.
24(5):667-73
[PMID] 17727943.
2008
Four-year clinical performance of a lithia disilicate-based core ceramic for posterior fixed partial dentures.
The International journal of prosthodontics.
21(2):155-60
[PMID] 18546772.
2008
The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic.
Dental materials : official publication of the Academy of Dental Materials.
24(9):1149-55
[DOI] 10.1016/j.dental.2008.01.004.
[PMID] 18329705.
2008
Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries.
Dental materials : official publication of the Academy of Dental Materials.
24(6):744-52
[PMID] 17949805.
2007
Effect of heat treatment on fracture toughness K(IC) and microstructure of a fluorcanasite-based glass-ceramic.
Journal of prosthodontics : official journal of the American College of Prosthodontists.
16(6):439-44
[PMID] 17760868.
2007
Influence of pH and oxygen-inhibited layer on fluoride release properties of fluoride sealant.
Journal of dentistry.
35(4):275-81
[PMID] 17118506.
2007
Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?
Clinical oral implants research.
18 Suppl 3:218-31
[PMID] 17594384.
2006
Apparent interfacial fracture toughness of resin/ceramic systems.
Journal of dental research.
85(11):1037-41
[PMID] 17062746.
2006
Controlled release of chlorhexidine from UDMA-TEGDMA resin.
Journal of dental research.
85(10):950-4
[PMID] 16998139.
2006
Fracture surface analysis of clinically failed fixed partial dentures.
Journal of dental research.
85(3):277-81
[PMID] 16498078.
2006
In vivo wear of enamel by a lithia disilicate-based core ceramic used for posterior fixed partial dentures: first-year results.
The International journal of prosthodontics.
19(4):391-6
[PMID] 16900824.
2006
Viscoelastic finite element analysis of an all-ceramic fixed partial denture.
Journal of biomechanics.
39(1):40-8
[PMID] 16271586.
2005
Effect of CaF2 content on rate of fluoride release from filled resins.
Journal of dental research.
84(5):440-4
[PMID] 15840780.
2005
Mammalian cell delivery via aerosol deposition.
Journal of biomedical materials research. Part B, Applied biomaterials.
72(2):334-8
[PMID] 15546150.
2005
Present and future approaches for the control of caries.
Journal of dental education.
69(5):538-54
[PMID] 15897335.
2005
Residual stresses in bilayer dental ceramics.
Biomaterials.
26(16):3235-41
[PMID] 15603818.
2004
Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs.
The International journal of prosthodontics.
17(4):469-75
[PMID] 15382785.
2004
Creep functions of dental ceramics measured in a beam-bending viscometer.
Dental materials : official publication of the Academy of Dental Materials.
20(3):297-304
[PMID] 15209236.
2004
Fracture behavior of lithia disilicate- and leucite-based ceramics.
Dental materials : official publication of the Academy of Dental Materials.
20(10):956-62
[PMID] 15501324.
2004
Role of investment interaction layer on strength and toughness of ceramic laminates.
Dental materials : official publication of the Academy of Dental Materials.
20(8):701-8
[PMID] 15302450.
2004
Shear stress relaxation of dental ceramics determined from creep behavior.
Dental materials : official publication of the Academy of Dental Materials.
20(8):717-25
[PMID] 15302452.
2004
Work of adhesion of resin on treated lithia disilicate-based ceramic.
Dental materials : official publication of the Academy of Dental Materials.
20(4):338-44
[PMID] 15019447.
2003
Effect of nucleation temperature on fracture toughness (KIC) of fluorcanasite-based glass-ceramic.
The International journal of prosthodontics.
16(5):505-9
[PMID] 14651235.
2003
Failure analysis of resin composite bonded to ceramic.
Dental materials : official publication of the Academy of Dental Materials.
19(8):693-9
[PMID] 14511726.
2003
Fracture toughness (K(IC) of a hot-pressed core ceramic based on fractographic analysis of fractured ceramic FPDs.
The International journal of prosthodontics.
16(2):135-40
[PMID] 12737243.
2003
Informatics systems to assess and apply clinical research on dental restorative materials.
Advances in dental research.
17:43-8
[PMID] 15126206.
2003
Seven secrets to discovery.
Journal of dental research.
82(6):413-4
[PMID] 12766189.
2003
Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures.
Dental materials : official publication of the Academy of Dental Materials.
19(7):662-9
[PMID] 12901992.
2002
Dental caries: risk assessment and treatment solutions for an elderly population.
Compendium of continuing education in dentistry (Jamesburg, N.J. : 1995).
23(10 Suppl):12-20
[PMID] 12790012.
2002
Effect of ceramic surface treatment on tensile bond strength to a resin cement.
The International journal of prosthodontics.
15(3):248-53
[PMID] 12066487.
2002
Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures.
The Journal of prosthetic dentistry.
87(5):536-42
[PMID] 12070517.
2002
Factors affecting enamel and ceramic wear: a literature review.
The Journal of prosthetic dentistry.
87(4):451-9
[PMID] 12011863.
2002
Influence of connector design on fracture probability of ceramic fixed-partial dentures.
Journal of dental research.
81(9):623-7
[PMID] 12202644.
2002
Influence of tab and disk design on shade matching of dental porcelain.
The Journal of prosthetic dentistry.
88(6):591-7
[PMID] 12488851.
2002
Maximum clenching force of patients with moderate loss of posterior tooth support: a pilot study.
The Journal of prosthetic dentistry.
88(5):498-502
[PMID] 12473999.
2002
Microstructure, composition, and etching topography of dental ceramics.
The International journal of prosthodontics.
15(2):159-67
[PMID] 11951806.
2002
Wetting characteristic of ceramic to water and adhesive resin.
The Journal of prosthetic dentistry.
88(6):616-21
[PMID] 12488855.
2001
Clinical decision-making for coronal caries management in the permanent dentition.
Journal of dental education.
65(10):1143-6
[PMID] 11699991.
2001
Contrast ratio of veneering and core ceramics as a function of thickness.
The International journal of prosthodontics.
14(4):316-20
[PMID] 11508085.
2001
Fracture resistance of all-ceramic and metal-ceramic inlays.
The International journal of prosthodontics.
14(2):109-14
[PMID] 11843445.
2001
Is it time to change state and regional dental licensure board exams in response to evidence from caries research?
Critical reviews in oral biology and medicine : an official publication of the American Association of Oral Biologists.
12(5):368-72
[PMID] 12002820.
2001
Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system.
Operative dentistry.
26(4):367-74
[PMID] 11504436.
2000
Ceramic design concepts based on stress distribution analysis.
Compendium of continuing education in dentistry (Jamesburg, N.J. : 1995).
21(8):649-52, 654; quiz 656
[PMID] 11199655.
2000
Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness.
Journal of dental research.
79(6):1398-404
[PMID] 10890719.
2000
Microtensile strength of composite bonded to hot-pressed ceramics.
The journal of adhesive dentistry.
2(4):305-13
[PMID] 11317377.
2000
Minimal intervention dentistry–a review. FDI Commission Project 1-97.
International dental journal.
50(1):1-12
[PMID] 10945174.
2000
Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics.
Journal of dentistry.
28(7):529-35
[PMID] 10960757.
1999
[New direct restorative materials].
Nederlands tijdschrift voor tandheelkunde.
106(4):128-40
[PMID] 11930356.
1999
Does ART have a place in preservative dentistry?
Community dentistry and oral epidemiology.
27(6):442-8
[PMID] 10600079.
1998
Buonocore Memorial Lecture. Materials of the future: preservative or restorative?
Operative dentistry.
23(4):162-7
[PMID] 9760917.
1998
Chemical durability of Dicor and fluorocanasite-based glass-ceramics.
Journal of dental research.
77(7):1553-9
[PMID] 9663441.
1998
Chlorhexidine, fluoride varnish, and xylitol chewing gum: underutilized preventive therapies?
General dentistry.
46(1):34-8, 40
[PMID] 9667160.
1998
Influence of glass-ceramic thickness on Hertzian and bulk fracture mechanisms.
The International journal of prosthodontics.
11(1):27-32
[PMID] 9588988.
1998
Management of dental caries as a chronic infectious disease.
Journal of dental education.
62(10):791-802
[PMID] 9847883.
1998
Marginal distortion of thermally incompatible metal ceramic crowns with overextended margins.
The International journal of prosthodontics.
11(4):325-32
[PMID] 9758996.
1998
New direct restorative materials. FDI Commission Project.
International dental journal.
48(1):3-16
[PMID] 9779078.
1998
Thermal incompatibility analysis of metal-ceramic systems based on flexural displacement data.
Journal of biomedical materials research.
41(4):614-23
[PMID] 9697035.
1998
Viscoelastic stress analysis of thermally compatible and incompatible metal-ceramic systems.
Dental materials : official publication of the Academy of Dental Materials.
14(4):237-45
[PMID] 10379251.
1997
Chemical durability of Dicor and lithia-based glass-ceramics.
Dental materials : official publication of the Academy of Dental Materials.
13(1):13-9
[PMID] 9467318.
1997
Efficacy of nonsurgical management of the initial caries lesion.
Journal of dental education.
61(11):895-905
[PMID] 9420566.
1997
Managed care in dentistry.
Quintessence international (Berlin, Germany : 1985).
28(3):210-7
[PMID] 9452689.
1997
Reducing the failure potential of ceramic-based restorations. Part 2: Ceramic inlays, crowns, veneers, and bridges.
General dentistry.
45(1):30-5
[PMID] 9171476.
1996
Analysis of tempering stresses in metal-ceramic disks.
Journal of dental research.
75(2):743-51
[PMID] 8655770.
1996
Effects of flaw size and auto-glaze treatment on porcelain strength.
Journal of dental research.
75(6):1414-7
[PMID] 8831637.
1996
Reducing the failure potential of ceramic-based restorations. Part 1: Metal-ceramic crowns and bridges.
General dentistry.
44(6):492-4
[PMID] 9515390.
1995
Introduction to invited papers presented at the 1994 ADM Annual Meeting Southampton, Bermuda.
Dental materials : official publication of the Academy of Dental Materials.
11(2)
[PMID] 8621028.
1995
Preservative dentistry: the standard of care for the 21st century.
Journal of public health dentistry.
55(2):67-8
[PMID] 7643329.
1995
Three-dimensional finite element analysis of the shear bond test.
Dental materials : official publication of the Academy of Dental Materials.
11(2):126-31
[PMID] 8621033.
1995
Treatment regimens in preventive and restorative dentistry.
Journal of the American Dental Association (1939).
126(6):727-43
[PMID] 7797729.
1994
Effect of grinding and fluoride-gel exposure on strength of ion-exchanged porcelain.
Journal of dental research.
73(8):1444-9
[PMID] 8083441.
1994
Effect of surface etching on the flexure strength and fracture toughness of Dicor disks containing controlled flaws.
Journal of dental research.
73(2):505-10
[PMID] 8120213.
1994
Fracture surface characterization of clinically failed all-ceramic crowns.
Journal of dental research.
73(12):1824-32
[PMID] 7814754.
1994
Guidelines for experimental studies.
Dental materials : official publication of the Academy of Dental Materials.
10(1):45-51
[PMID] 7995475.
1994
Influence of colorants on crystallization and mechanical properties of lithia-based glass-ceramics.
Dental materials : official publication of the Academy of Dental Materials.
10(2):141-6
[PMID] 7758851.
1994
Influence of P205, AgNO3, and FeCl3 on color and translucency of lithia-based glass-ceramics.
Dental materials : official publication of the Academy of Dental Materials.
10(4):230-5
[PMID] 7664989.
1994
Optimization of glass-ceramic crystallization based on DTA exotherm analysis.
Dental materials : official publication of the Academy of Dental Materials.
10(3):167-71
[PMID] 7758859.
1994
Optimum treatment based on decision tree-analysis, Part 2.
Dentistry today.
13(4):90-3
[PMID] 9540666.
1994
Sensitivity of catalyst/base ratio on curing of resin luting agents: polymerization exotherm analysis.
Dental materials : official publication of the Academy of Dental Materials.
10(5):314-8
[PMID] 7498592.
1994
Stress relaxation behavior of dental porcelains at high temperatures.
Dental materials : official publication of the Academy of Dental Materials.
10(3):178-84
[PMID] 7758861.
1994
System for the pH-dependent release of a dye in model dental restorations.
Journal of dental research.
73(12):1833-40
[PMID] 7814755.
1993
Effects of initial temperature and tempering medium on thermal tempering of dental porcelains.
Journal of dental research.
72(3):566-71
[PMID] 8450115.
1993
Recent developments in restorative dental ceramics.
Journal of the American Dental Association (1939).
124(2):72-4, 76
[PMID] 8429187.
1992
Analysis of tempering stresses in bilayered porcelain discs.
Journal of dental research.
71(5):1139-44
[PMID] 1607429.
1992
Decision analysis in restorative dentistry.
Journal of dental education.
56(12):812-22
[PMID] 1487584.
1992
Degradability of dental ceramics.
Advances in dental research.
6:82-9
[PMID] 1292468.
1992
Effect of loading conditions on bi-axial flexure strength of dental cements.
Dental materials : official publication of the Academy of Dental Materials.
8(2):100-4
[PMID] 1521689.
1992
Fracture susceptibility of dental ceramics.
Today's FDA : official monthly journal of the Florida Dental Association.
4(2):1C-3C
[PMID] 19256112.
1992
Strengthening of feldspathic porcelain by ion exchange and tempering.
Journal of dental research.
71(5):1134-8
[PMID] 1607428.
1992
Strengthening of porcelain by ion exchange subsequent to thermal tempering.
Dental materials : official publication of the Academy of Dental Materials.
8(3):149-52
[PMID] 1521700.
1992
Tensile stress in glass-ceramic crowns: effect of flaws and cement voids.
The International journal of prosthodontics.
5(4):351-8
[PMID] 1520457.
1992
Visual and profilometric wear measurements.
Acta odontologica Scandinavica.
50(2):121-7
[PMID] 1604966.
1991
Effect of thermal tempering on strength and crack propagation behavior of feldspathic porcelains.
Journal of dental research.
70(6):1009-13
[PMID] 2045569.
1991
Influence of initial flaw size on crack growth in air-tempered porcelain.
Journal of dental research.
70(2):131-6
[PMID] 1991870.
1991
Response to patients who inquire about the safety of dental amalgam.
Quintessence international (Berlin, Germany : 1985).
22(4):249-50
[PMID] 1891596.
1990
Effectiveness of cast-joined Ni-Cr-Be structures.
The International journal of prosthodontics.
3(6):550-4
[PMID] 1982053.
1990
Influence of test method on failure stress of brittle dental materials.
Journal of dental research.
69(12):1791-9
[PMID] 2250083.
1990
Performance of dental biomaterials: conference report.
Dental materials : official publication of the Academy of Dental Materials.
6(1):69-72
[PMID] 2376299.
1990
Tempering as a means to strengthen porcelain-fused-to-metal restorations.
Biomedical sciences instrumentation.
26:167-74
[PMID] 2334762.
1990
Three-dimensional finite element analysis of glass-ceramic dental crowns.
Journal of biomechanics.
23(11):1157-66
[PMID] 2277050.
1989
Effect of firing temperature and water exposure on crack propagation in unglazed porcelain.
Journal of dental research.
68(6):1075-81
[PMID] 2808866.
1989
Effect of visco-elastic behavior on stress development in a metal-ceramic system.
Journal of dental research.
68(8):1223-30
[PMID] 2698895.
1989
Influence of framework design, contraction mismatch, and thermal history on porcelain checking in fixed partial dentures.
Dental materials : official publication of the Academy of Dental Materials.
5(1):58-63
[PMID] 2691298.
1989
Influence of tempering and contraction mismatch on crack development in ceramic surfaces.
Journal of dental research.
68(7):1182-7
[PMID] 2632603.
1989
Tempering stresses in feldspathic porcelain.
Journal of dental research.
68(2):134-8
[PMID] 2918135.
1988
Criteria for placement and replacement of dental restorations.
Florida dental journal.
59(2):30-1
[PMID] 3203800.
1988
Delayed crack development in porcelain due to incompatibility stress.
Journal of dental research.
67(8):1086-91
[PMID] 3165401.
1988
Dental impression materials: reactor response.
Advances in dental research.
2(1):65-70
[PMID] 3248140.
1988
Influence of contraction mismatch and cooling rate on flexural failure of PFM systems.
Journal of dental research.
67(1):61-5
[PMID] 11039047.
1988
Influence of incisal length of ceramic and loading orientation on stress distribution in ceramic crowns.
Journal of dental research.
67(11):1371-5
[PMID] 3053819.
1987
Comparison of pain associated with mechanical and chemomechanical removal of caries.
Journal of dental research.
66(11):1680-3
[PMID] 10872406.
1987
Effect of incompatibility stress on the fit of metal-ceramic crowns.
Journal of dental research.
66(8):1341-5
[PMID] 3305635.
1987
Stress distribution in metal-ceramic crowns with a facial porcelain margin.
Journal of dental research.
66(9):1493-8
[PMID] 3305641.
1986
An analytical model to predict the effects of heating rate and applied load on glass transition temperatures of dental porcelain.
Journal of dental research.
65(5):643-7
[PMID] 3457817.
1986
Inert gas presoldering of nickel-chromium alloys.
The Journal of prosthetic dentistry.
55(3):317-23
[PMID] 2870185.
1986
Influence of metal thickness on stress distribution in metal-ceramic crowns.
Journal of dental research.
65(9):1173-8
[PMID] 3525630.
1985
Analysis of alloy-porcelain compatibility using a multi-component material strip equation.
Journal of dental research.
64(11):1337-44
[PMID] 3912418.
1985
Castability of silver-base fixed partial denture alloys.
The Journal of prosthetic dentistry.
53(3):329-32
[PMID] 3886880.
1985
Flexure test evaluation of presoldered base metal alloys.
The Journal of prosthetic dentistry.
54(4):507-17
[PMID] 2864437.
1985
Interactive effect of stress and temperature on creep of PFM alloys.
Journal of dental research.
64(8):1094-9
[PMID] 3894455.
1985
Noble metal alloys for metal-ceramic restorations.
Dental clinics of North America.
29(4):789-803
[PMID] 3908167.
1984
Effect of metal design on marginal distortion of metal-ceramic crowns.
Journal of dental research.
63(11):1327-31
[PMID] 6389636.
1983
Analysis of thermally-induced stresses in porcelain-metal systems.
Journal of dental research.
62(5):593-7
[PMID] 6573379.
1983
Thermal shock resistance of porcelain discs.
Journal of dental research.
62(10):1082-5
[PMID] 6578238.
1982
An evaluation of the four-point flexural test for metal-ceramic bond strength.
Journal of dental research.
61(9):1066-9
[PMID] 6763043.
1982
Correlation of thermal shock resistance with thermal compatibility dat for porcelain-metal systems.
Journal of dental research.
61(2):419-22
[PMID] 6948861.
1981
A thermal shock test for porcelain-metal systems.
Journal of dental research.
60(9):1686-91
[PMID] 6943163.
1981
Porcelain-metal thermal compatibility.
Journal of dental research.
60(4):815-9
[PMID] 7009673.
1980
Comparative evaluation of ceramic-metal bond tests using finite element stress analysis.
Journal of dental research.
59(3):608-13
[PMID] 7009667.
1980
Thermal expansion of dental alloys and porcelains.
Journal of biomedical materials research.
14(4):435-46
[PMID] 6995461.
1979
Identification of fracture zones in porcelain-veneered-to-metal bond test specimens by ESCA analysis.
The Journal of prosthetic dentistry.
42(4):417-21
[PMID] 385843.
1979
Microstructures in non-precious alloys near the procelain-metal interaction zone.
Journal of dental research.
58(10):1987-93
[PMID] 387836.
1977
Adherence controlling elements in ceramic-metal systems. I. Precious alloys.
Journal of dental research.
56(9):1045-52
[PMID] 336660.
1977
Adherence controlling elements in ceramic-metal systems. II. Nonprecious alloys.
Journal of dental research.
56(9):1053-61
[PMID] 336661.
1977
Bonding mechanism evidence in a ceramic–nonprecious alloy system.
Journal of biomedical materials research.
11(5):701-9
[PMID] 330539.
Contact Details
Phones:
- Business:
- (352) 273-5831
Emails:
- Business:
- kja40@ufl.edu
Addresses:
- Business Mailing:
-
COLLEGE OF DENTISTRY
PO BOX 100446
DEPARTMENT OF RESTORATIVE DENTAL SCIENCES
GAINESVILLE FL 326100446 - Business Street:
-
D9-16 DSB
GAINESVILLE FL 32611